Shark® WANDVAC™ System Ultra-Lightweight Powerful Cordless Stick Vacuum with Charging Dock - Slate

Quick cleaning power that's always ready. The WANDVAC® System is the sleek, powerful answer for the everyday clean. Packed with Shark® cleaning innovation, it’s got the performance you need for any mess, in a size that’s easy to handle.
Out of Stock
Includes Five (5) Year Limited Warranty

Stands out in your home. Fits into your life.

Meet the powerful, ultra-versatile answer to the quick clean. From stick vacuum to extended wand to hand vacuum, you’ve got every setup you need for grab-and-go cleaning.


PowerFins™ deliver continuous cleaning contact on all surfaces, digging deep into carpets, directly engaging floors, and delivering incredible pet hair pickup.

Self-cleaning brushroll

Powerfully pulls in long hair and pet hair, sending it straight to the dust cup—no more hair wrap.

HyperVelocity® Accelerated Suction Power

Streamlined air flow and a high-speed brushless motor combine to deliver accelerated suction power for advanced cleaning performance.

Meet the Shark® WANDVAC® System, the ultra-powerful, lightweight 3-in-1 cordless vacuum ready for anything. Handle above-floor cleans in hand vac or wand mode, or snap into stick vacuum mode in seconds to tackle floors and carpets with ease. Includes a sleek charging and storage base, HyperVelocity® accelerated suction power, and a PowerFins™ brushroll to deep-clean dirt, debris, and more.
• POWERFUL AND LIGHTWEIGHT: The most powerful cordless hand vacuum under 2.1 pounds. Based on ASTM F558, measured at the hand vac, versus stand-alone and cordless stick hand vacs under 2.1 lbs.
• ALWAYS READY FOR A QUICK CLEAN: Includes a portable charging base that fits almost anywhere in your home, with two unique storing and charging setups to match the way you clean.
• INCREDIBLE CORDLESS SUCTION: HyperVelocity® accelerated suction power provides incredible cleaning performance in an ultra-lightweight frame.
• ONE-TOUCH HYGIENIC DUST CUP EMPTY: One quick touch to empty the dust cup with no mess.
• BOOST MODE FOR TOUGH MESSES: Press the Boost button for extra bursts of strong suction for tougher messes.
• ONE-TOUCH TRANSITIONS: Easily switch between cleaning modes in seconds.
• DEEP-CLEANING TECHNOLOGY: PowerFins™ technology for continuous cleaning contact to dig deep into carpets and directly engage floors.
• NO HAIR WRAP: Self-cleaning brushroll for no hair wrap.
Hazmat Class/Battery Cell TypeUN3481 – Lithium Ion Battery with or in Equipment
Cleaning Path Width21.21 cm
Product Dimensions (cm)29.46 cm L x 28.45 cm W x 111.76 cm H
Dust Cup Capacity0.12 L
ColorIconic Steel Grey
Voltage11.1 volts
Wattage225 watts
Filter TypeHEPA H-10, washable
Warranty (years)5 Years unit, 2 years battery
Number of Batteries Included1
LED LightsYes
Weight5.9 lbs

Free shipping on all orders over $75*

SharkNinja offers a 60-day money back guarantee for purchases from this Site, or for select products, a 90-day money back guarantee. The applicable money back guarantee will be stated with your order.

*does not apply outside of Canada. Orders to be shipped to Northwest Territories, Yukon or Nunavut or other territories outside of Canada or to an international address are subject to a surcharge.

  • Duster crevice tool
  • Pet multi-tool

How do I clean above the floor with or without accessories?
To clean with the hand vacuum, detach it from the wand. Press the release buttons on both sides of the handle and lift the hand vac off the wand.

For more cleaning reach, leave the hand vacuum attached to the wand, and detach the wand from the floor nozzle. Press the nozzle release button on the bottom of the wand, then gently pull up on the hand vac to remove the nozzle.

Attach an accessory to the nozzle opening in the hand vacuum or the wand opening and begin cleaning. To detach accessories from the hand vacuum, press the one-touch release buttons. To detach accessories from the wand, press the nozzle release button.
How do I store my vacuum?
WANDVAC™ system technology allows you to store this vacuum in an upright position, or a compact, side-by-side position.

  • Place the unit on the charging dock, with the hook on the back of the wand hanging on the charging post.
  • Make sure the contacts on the wand are aligned with the contacts on the charging post.
  • Another option is side-by-side storage and charging. Detach the hand vacuum from the wand, then slide the hand vacuum nozzle opening over the post on the storage arm.
  • A third option is to plug the charging port directly into the hand vacuum. Unplug the cord from your charging dock and connect it to the port in the hand vac nozzle.
How do I use the different cleaning modes?
This Shark® vacuum has two power settings. Use Standard mode for regular cleaning, and Boost mode for a burst of extra suction power.

To clean bare floors or carpets:
  • Press the power button on the handle to turn on the suction.
  • Press and hold the boost button on the back base of the handle to activate Boost mode.
  • Press the power button again to turn power off.
How long will the battery run and will I ever need to replace it?
Like all lithium-ion products, your battery will naturally decrease in capacity over time from the 100% capacity of a new battery. At full charge, the unit will run for 17 minutes. Using Boost mode exhausts battery life at a faster rate. If Boost mode is engaged at all times, the unit will run for 8 minutes.

These runtimes are based on 100% capacity.
When and how do I clean the filters?
Filters may need to be cleaned if the vacuum stops picking up dirt, if airflow is restricted, or if you notice lighter or no suction. For optimal performance, clean filters regularly. Between cleanings, lightly tap filters over a trash receptacle to remove dust and debris as needed.

Rinse the fabric filter once monthly, or as needed.
  • To access the fabric filter, first eject the dust cup, then press the filter release latch to remove the filter housing.
  • Press the tabs on the orange frame of the filter to gently remove it from the filter housing.
  • Tap clean.
  • Rinse filter with water only.
  • Allow filter to air-dry completely (at least 24 hours) before reinstalling.
  • To reinstall, slide the filter back into the filter housing, press the housing back into place, then close the dust cup.

Rinse the cyclone filter in the dust cup every 12 months, or as needed.
  • Repeat above steps to remove the fabric filter.
  • With the dust cup open to 90 ° lift out the cyclone filter by pulling the wire handle.
  • Wipe the cyclone frame with a damp cloth.
  • Rinse the dust cup with water only.
  • Allow dust cup and cyclone filter to air-dry completely (at least 24 hours) before reinstalling.
  • Once dry, reinstall the cyclone filter. Fold the wire frame back in place.
  • Reinstall the fabric filter by sliding it back into the housing. Press the housing back into place, then close the dust cup.