15% Off with code FALL15

Shark® Rotator® Upright Vacuum with Powered Lift-Away® and Self-Cleaning Brushroll

ZU632
The Shark® Rotator® Powered Lift-Away® with Self-Cleaning Brushroll Upright Vacuum eliminates hair wrap with the self-cleaning brushroll and gives you more reach with the Powered Lift-Away pod—clean under furniture and above the floor on stairs, furniture, and more.
N/A
Out of Stock
Includes Five (5) Year Limited Warranty

Versatile Upright Power

The Shark® Rotator® Powered Lift-Away® Upright Vacuum eliminates hair wrap and gives you more reach with Powered Lift-Away—clean under furniture and above-floor on upholstery and more..

Deep cleaning with no hair wrap.

Powerfully pulls in long hair and pet hair, sending it straight to the dust cup—no more hair wrap.

The Shark® Rotator® Powered Lift-Away® with Self-Cleaning Brushroll is an ultra-powerful upright vacuum. Take on carpets and floors with no hair wrap with the self-cleaning brushroll. For more reach, detach the Powered Lift-Away pod to clean under furniture and on stairs, curtains, upholstery, and more. A large-capacity dust cup gives you whole-home cleaning capabilities, and all of the debris you tackle is trapped by Anti-Allergen Complete Seal and a HEPA filter—dust and allergens stay inside the vacuum, and out of the air you breathe.
• Powered-Lift Away® allows the pod to detach so you can extend the reach of the nozzle while deep-cleaning, including under furniture.
• The self-cleaning brushroll removes long hair and pet hair with no hair wrap.
• Anti-Allergen Complete Seal Technology® and a HEPA filter trap dust and allergens inside the vacuum cleaner.
• Large capacity allows for long cleaning sessions with fewer interruptions to empty the dust cup.
• Fingertip controls allow you to easily switch from Hard Floor to Carpet mode.
• Powerful LED headlights on the vacuum nozzle reveal hidden debris around your home.
Cleaning Path Width30.48 cm
ColorBlue Jean
Wattage1150 watts
Warranty (years)5
LED LightsYes
Weight16.2 lbs
Cord Length7.62 m
Hose Length1.83 m
Product Dimensions (cm)39.47 cm L x 30.38 cm W x 117.42 cm H
Voltage120 volts
Dust Cup Capacity0.83 L
Amperage9.5 amps
Filter TypeWashable HEPA + Foam and Felt Filters

Free shipping on all orders over $75*

SharkNinja offers a 60-day money back guarantee for purchases from this Site, or for select products, a 90-day money back guarantee. The applicable money back guarantee will be stated with your order.

*does not apply outside of Canada. Orders to be shipped to Northwest Territories, Yukon or Nunavut or other territories outside of Canada or to an international address are subject to a surcharge.


  • Pet Crevice Tool
  • Upholstery Tool

How do I assemble my vacuum?
  • Place the pod onto the floor nozzle and press down until it clicks into place.
  • Insert the wand into the pod.
  • Insert the handle into the wand.
  • Attach the hose clip to the wand.
  • Connect the hose to the back of the pod.

For proper operation, ensure all parts are firmly clicked into place.
How do I use the different cleaning modes?
For bare floors and delicate area rugs:
  • Press the power button on the vacuum pod to turn on suction.
  • On the handle, slide the floor selector to Hard Floor.
  • To activate the brushroll, gently step on the floor nozzle and tilt the handle back.
  • Note that the brushroll will spin slower in Hard Floor mode.

For thick carpet and area rugs:
  • Press the power button on the vacuum to turn on suction.
  • On the handle, slide the floor selector to Thick Carpet/Area Rug.
  • To activate the brushroll, gently step on the floor nozzle and tilt the handle back.

For carpets / low pile:
  • Press the power button on the vacuum to turn on the suction.
  • On the handle, slide the floor selector to Carpet/Low Pile.
  • To activate the brushroll, gently step on the floor nozzle and tilt the handle back.
  • The brushroll will spin faster in Carpet/Low Pile mode.
When and how do I clean the filters?
Filters may need to be cleaned if the vacuum stops picking up dirt, if airflow is restricted, or if you notice lighter or no suction. For optimal performance, clean filters regularly. Between cleanings, lightly tap filters over a trash receptacle to remove dust and debris as needed.

Rinse the pre-motor foam and felt filters every 3 months, or as needed.
  1. First, remove the dust cup to access the pre-motor filters.
  2. Slide up the release latches on both sides of the dust cup handle. Lift the dust cup up and away from the pod.
  3. Remove the foam and felt filters.
  4. Rinse both filters with water only.
  5. Allow filters to air-dry completely (at least 24 hours) before reinstalling.
  6. Once dry, install the felt filter first, followed by the foam filter.
  7. Reinstall the dust cup by placing the bottom of the dust cup into the pod and then tilting until it clicks into place.


Rinse the post-motor HEPA filter every 12 months, or as needed.
  1. Pull the latch under the HEPA filter cover and lift off the cover.
  2. Remove the HEPA filter.
  3. Rinse with water only.
  4. Allow filter to air-dry completely (at least 24 hours) before reinstalling.
  5. Once dry, reinstall the HEPA filter.
  6. Reattach the HEPA filter cover until it clicks into place.
When and how do I empty the dust cup?
For optimal performance, empty the dust cup each time you vacuum, or when debris reaches the MAX FILL line.
  1. Slide up the release latches on both sides of the dust cup handle. Lift the dust cup up and away from the pod.
  2. Hold the dust cup over the trash and press the bottom door release button on the front.
  3. Tap gently to empty contents.
  4. Close the dust cup door, pressing it until it clicks into place.
  5. Press the top door release button near the Max Fill line. Remove any debris and ensure the metal cone is clear of debris.
  6. Wipe the interior of the dust cup clean.
  7. To reinstall, place bottom of dust cup into the pod and then tilt until it clicks into place.