$699.99
The Shark® IQ Robot™ vacuum combines convenience with intelligence and performance. After each cleaning session, your robot vacuum automatically empties the dust bin into the bagless base, which holds dirt and debris from up to 30 cleaning sessions. With IQ NAV™, your robot now maps your whole home, allowing you to select which rooms to clean immediately with Shark® Clean™ App or Amazon Alexa. The Shark® IQ Robot™ cleans row by row to assure total floor cleaning. With recharge and resume, it will return to the base, empty, recharge, and can pick up where it left off. And with Shark® powerful suction and a self-cleaning brushroll, you get amazing cleaning performance.
Out of stock
Wattage | 35 watts |
Amperage | 2 amps |
Voltage | 17 volts |
Dust Cup Capacity | 160 mL |
Bagless | Yes |
Cleaning Path Width | 14 cm |
Cord Length | 1.2 m |
Filter Type | Non-Washable Filter |
Anti-Allergenic | No |
Product Length | 33 cm |
Product Width | 32 cm |
Product Height | 9 cm |
Product Weight | 3 kg |
Wheel motor encoder failure. Please contact Shark customer service.
Suction motor failure. Remove and empty the dust bi, clean the filters, and remove any blockages.
Robot has encountered an error while charging. Please make sure you are using the correct power cord for the base.
Blockage in dust bin. Check base and robot dust bin for clogs. Clean any debris and reinstall the dust bin, ensuring that it clicks into place.
Blockage in brushroll. Remove and debris from around the brushroll so that it can spin freely.
Battery is critically low and needs recharging. Please pick up your robot and place it on the base. Make sure the base indicator light turns blue to confirm your robot is place don the base correctly.
Make sure your base indicator light turns blue to confirm your robot is placed on the base correctly.
Robot has encountered an error while booting. Please turn the power off and back on.
Blockage in brushroll. Remove and debris from around the brushroll so that it can spin freely.
Robot is stuck. Move your robot to a new location and make sure the front bumper moves in and out freely.
A drive wheel is stuck. Clean the wheels and remove any debris wrapped around the axles so they can move freely.
Side bush is stuck. Remove any debris from around the side brushes so they move freely.
Robot dust bin needs to be reinstalled. Insert the dust bin until it clicks in place.
Cliff sensor error. Move your robot to a new location and clean its cliff sensors.
BotBoundary(TM) error. Move your robot to a flat surface away from the magnetic boundary strip and try cleaning again.
Front bumper may be jammed. Clean the bumper and make sure it moves in and out freely.
Robot my be stuck on an obstacle. Move robot to a new location on a level surface.